Motogadget - M-Unit basic Control Unit

275.72 €


The m-Unit basic is a digital control unit for your motorbike - the 'heart' of the vehicle's electrical system.

The m-Unit basic can be operated by push-button control or conventional switch controls mounted at the handle bar. The control box is used for switching of all necessary vehicle components and doubles as fuse panel.
Its compact case has the approximate size of a cigarette box and is completely moulded in - resistant to water, weather and vibrations.
It is easily mounted by two M5 screws. All cable connections are made using terminal blocks.

The m-Unit basic is the 'electrical heart' of the motorbike. All switching operations are completely digitally controlled by a microprocessor and the latest solid-state technology - completely without mechanical relays, taking vehicle electrical systems to a new level!

Features of the new version V.2

- Reduced standby current of 0.35 mA (equivalent to 0.00035 A) if alarm system off, and 0.48 mA (equivalent to 0.00048 A) if alarm system on - for longer battery life
- Alarm system triggered by position-independent MEMS 3D gravity senor.
- Installation in every position possible
- Alarm system with adjustable pre-alarm and adjustable levels of sensitivity
- Alarm system can be deactivated for easy transport mode
- Integrated parking light
- Voltage range of 3V to 20V
- Can be used with 6V and 12V electrical systems
- With extended voltage range, starting of an engine with a large displacement or high compression is no longer a problem
- Protected against reverse polarity
- Protected against overvoltage
- Extreme cable reduction by integrating all cables of switch or push buttons control including brake light switch in the handlebar. With only one cable the m-Unit V.2 is operated via a digital bus technology (product m-Button is required)

Dimensions and specifications

L/W/H: 10.1 x 6.1 x 2.8 cm
• Weight: approx. 180 g
• Fixture: 2 x M5 screws, stainless steel (mounting and ground terminal), 1 x • M5 screw-on terminal for battery positive
• Operating voltage: 3V - 20V
• Operating temperature: -20 °C... +80 °C

1 x input (plus, switched) for ignition lock or m-Lock
7 x pilot input (minus/ground, switched) for left turn signal, right turn signal, low beam/high beam, starter, horn, brake light, kill switch or setup respectively

8 x output (plus) for left turn signal, right turn signal, low beam, high beam, starter, horn, brake light, AUX (switched plus for all other appliances)

Parts delivered

m-Unit basic, approx. 50 cm connector cable for battery plus terminal with 10 mm˛ nominal cross-section, 2 cable eyelets, 1 x M5 stainless steel screw, 2 x M5 stainless steel screw with nut, detailed installation and operating instructions

Compatible bikes:

Bonneville T120/T120 Black (water cooled)
Bonneville T100/T100 black (water cooled)
Thruxton 1200 (water cooled)
Thruxton 1200 R (water cooled)
Street Twin (water cooled)
Street Scrambler (water cooled)
Street Cup (water cooled)
Bobber (water cooled)
New Speedmaster (water cooled)
Bonneville (all) (air cooled)
Thruxton (all) (air cooled)
Scrambler (all) (air cooled)
Old Speedmaster (all) (air cooled)
America (all) (air cooled)
Thunderbird
Thunderbird Sport
Legend TT

Universal

*VAT Removed at checkout for Non EEC Members

Add to Cart:

  • Model: 4002035 - M-Unit basic
  • Manufactured by: Motogatget




♣ British Racer® Motorcycles - Custom and Performance parts - Triumph Accessories - Smitter Mark® Accessories ♣
Contacts: • British Racer Dealers/Franchising: info@britishracer.com/franchising@britishracer.com
Triumph Dealers: triumph@britishracer.com
Phone: +39 380.2608 025 - VAT-ID 01702800671 - C.R.N. TE-154744
Copyright © 2008-2018 British Racer®
British Racer Pictures - All Rights Reserved
Effettua la registrazione a PayPal e inizia ad accettare pagamenti tramite carta di credito immediatamente.