- There are no more items in your cart
- Shipping
- Total €0.00
- BRITISH RACER PARTS
- RUMBLER project ← 2015
- RUMBLER project 2016 →
- LIGHTING
- ELECTRICAL PARTS
- IGNITION
- SPEEDOMETERS AND INSTRUMENTS
- HANDLEBARS
- FORK
- SHOCK ABSORBERS
- CONTROLS
- BRAKES
- WHEELS
- BODYWORK
- SEATS
- TANK
- EXHAUST
- POWER
- ENGINE
- CLUTCH
- SPROCKETS CHAINS AND PULLEYS
- CRANKCASE & VALVE COVER
- GASKETS
- HARDWARE
- WORKSHOP, GARAGE AND TOOLS
- OILS AND OTHER CHEMICAL PRODUCTS
- TRIUMPH CLASSIC PARTS
- TRIUMPH CLASSIC ← 2015
- RUMBLER project ← 2015
- LIGHTING
- ELECTRICAL PARTS
- IGNITION
- SPEEDOMETERS AND INSTRUMENTS
- HANDLEBARS
- FORK
- SHOCK ABSORBERS
- CONTROLS
- BRAKES
- WHEELS
- BODYWORK
- SEATS
- TANK
- EXHAUST
- CARBURETOR AND INJECTION
- ENGINE
- CLUTCH
- SPROCKETS CHAINS AND PULLEYS
- CRANKCASE & VALVE COVER
- GASKETS
- HARDWARE
- OWNER'S HANDBOOK
- WORKSHOP, GARAGE AND TOOLS
- OILS AND OTHER CHEMICAL PRODUCTS
- TRIUMPH CLASSIC 2016 →
- TRIUMPH CLASSIC ← 2015
- TRIUMPH GENUINE PARTS
- ROYAL ENFIELD PARTS
- CONTINENTAL GT 650
- INTERCEPTOR 650
- SUPER METEOR 650
- METEOR 350
- HNTR 350
- CLASSIC 350
- SCRAM 411
- HIMALAYAN 400
- APPAREL AND HELMETS
- ACCESSORIES
- OUTLET
The Mo-switch is a high quality universal push-button control for handle bars with 1 in. or 22 mm (7/8 in.) tube diameter in a plain and elegant design.
These finely CNC machined hand controls in combination with an electronic push-button control unit (not included in kit) are used to operate all electrical features, e.g. lights, turn signal, E-Starter, horn, etc.
The casing is made from CNC machined billet aluminium and available in mirror polished or reflective black finished surface respectively.
The compact design casing permits mounting two or more units on one handle bar.
Each unit is equipped with two push-buttons in black or stainless steel.
Tw flush built-in M5 stainless steel mounting screws ensure secure and stable clamping of the push-button control to all handle bars.
The push-buttons are of high quality, very robust design and vibration- and spraywater-proof (IP65).
The adequate size and ergonomic pressure point (easy, mechanical detent) provide for a definite actuation sensing - even when operated with gloves. This feedback allows shifting without the need to check the operation.
Each push-button is equipped with two terminals for an easy optional circuit layout with only one or two cables. The internal ground terminal is already provided for the 'one cable layout'. Therefore, the routing of the cable inside the handle bar can be performed easily.
The push-buttons are available separately and can be replaced if damaged.
The Mo-switch is of course compatible to all common push-button controls.
Dimensions
Inner diameter: Ø 22mm (7/8") or Ø 25.4mm (1")
Outer diameter: approx. 49 mm
Width: 20.5 mm
Compatible motorcycles:
Universal
No customer reviews for the moment.