Motogadget push-button mini
Beautiful handcrafted switch, machined aluminum. Ideal for a neat look. It is ideal for eliminating ugly original switches. These mini switches have a contoured base designed to line up with either 22 mm/7/8" or 25.4 mm/1" handlebars. The measurements of the aluminum body are, length 41 mm, width 18 mm, height 11 mm.
You can install 1 or more switches for each handlebar.
Easy to install, requires 2 holes, a 15 mm diameter hole for the rocker switch and a 9 mm diameter hole for the push button switch.
Note: Requires a 3.3 mm M4 threaded hole to create the recess for the supplied screw that secures the switch to the handlebars. All wiring associated with the switch can be routed inside the handlebars to your desired exit point.
Button is momentary "push-in" type (active only while pressed), lever is "on/off/on" type.
The switch can handle up to about 4 amps, if you want to control devices with higher current, such as headlights, the switch must be paired with a relay to work.
Ideal for custom applications.
Made in Japan!
No customer reviews for the moment.